A sleek nickel‑plated brass adapter with a 5 mm G1/4" thread, matching 14 mm OD tubes for liquid cooling systems. Its matte black finish blends seamlessly into any build while providing secure, leak‑free connections.
EK Water Blocks HD tubing is a high-quality, pre-cut 10/12mm acrylic tubing designed specifically for liquid cooling systems. It comes in two pieces and is compatible with EKWB products.
Bitspower None Chamfer Crystal Link Tube-Length 1000mm. Only Compatible With Bitspower Fitting C47/C48/ML Series. Used before be cut in right length and have champher be finished.
The sensor has a 60cm connection cable and a two-pin plug. This temperature sensor has a G1 / 4 thread and can be used with any hoses with suitable connectors.
The EK-FB GA Z170X Ultra Monoblock is a complete liquid cooling solution for the Skylake® Intel® LGA-1151 CPU and the following GIGABYTE® motherboards. Unlike other solutions on the market, it is a robust, reliable, one-piece liquid
The factory-installed heatsink must be removed from each memory module before installation. EK-RAM Monarch Module is a heat sink adapter that allows virtually any SDRAM memory module to be liquid cooled along with the EK-RAM Monarch series water blo
As the computing industry continues to accelerate its move towards the implementation of liquid cooling solutions, pumps have become a major concern for the adoption of such systems on mission-critical machines. Small size, low or no maintenance
Aquacomputer Pumpenhalterung aus Edelstahl zur Befestigung an einem Radiator. The bracket can be used with radiators that are threaded on both sides for mounting the fan, eg airplex PRO / XT. Here, stainless steel brackets are the ideal airflow
Please note: 6 water tank and water block are not included in the delivery! If the water block is used that does not have two narrower segments, the washers should be used to mount it. For example 6x item no. The passive heat sink and the Real Time Clo
The Bitspower None The PETG Link connection tube is a solid tube and is used to connect multiple cooling blocks by VGA water or other water cooling components. It is composed of PETG, a plastic material, since it is also use
The sensor has a 60cm connection cable and a two-pin plug. This temperature sensor has one G1 / 4 internal and external thread and is extremely space-saving, as it can be mounted directly on a CPU cooler or a radiator.
The NA-SEC2 is a fan accessory set consisting of three 30 cm NA-EC2 extension cables fully recessed for 3-pin fans. NA-EC2 cables provide a wide range for installation of fans in larger boxes and can be chain-chained when more than 30 cm
Noiseblocker e Loop fans are designed to reduce frame vibration as much as possible to prevent resonance from being transferred to the chassis. New fans are relying on Dr. Noiseblocker's research results as they already have the widest ran
Ultra-compact low-profile cooler with only 39mm total height – ideal for HTPCs, ITX and Small Form Factor builds - 100% compatibility RAM- and PCIe-compatibility due to 95x95mm footprint, does not overhang the RAM or PCIe slots - Highly optimised NF-A9x
The Aqua Computer Splitty9 is a multi-device fan and Aquabus splitter that allows you to connect up to nine fans or Aquabus devices. Its sleek black design makes it an attractive addition to any computer setup.
Streacom has a plan; that plan is to design computer products and accessories that can fuse the boundaries between form, function, quality and value. The ST-HT4 heatpipe adapter was developed to provide a passive cooling solution t
The Bitspower None The PETG Link connection tube is a solid tube and is used to connect multiple cooling blocks by VGA water or other water cooling components. It is composed of PETG, a plastic material, since it is a
The package contains only 2 pieces of tube. Check EK-HD adapter or EK-HDC compression accessories separately. The tube may be thermally treated to achieve certain curvatures. For easier installation we recommend wetting the joint with water